|
Porous Metal ( SUS316L ) ( Foam Metal / Perforated Metal / Metal Mesh, Gas Diffuse Layer Separator, Current Collector, Adsorption of contaminated water, Filtered impurities adsorption, magamine-manu ) 
Specifications by porous metal model( SUS316L) Select the metal in the following table.
SUS316L/Ti, Ni, Cu, Ag
Material |
SUS316L/Ti |
Ni |
Cu |
Ag |
Thickness
(mm)
|
Max |
10 |
15 |
5 |
2 (Effective value) |
Min |
0.8 ① ② |
1.6 ① ② |
0.8 ① ③ |
0.8 ① ③ |
Size
(mm)
|
Max |
250x200 |
500x500 |
250x150 |
150x150 |
Min |
10x10 |
10x10 |
10x10 |
10x10 |
①. For MF-8, MF-13 models with large porosity, the minimum
thickness is 5mm ~ Max.
②. Minimum deformation
processing unit thickness is 0.3mm.
③. Minimum deformation
processing unit thickness is 0.5mm.
Porous Metal model specific attributes ( MF-8, MF-13, MF-20, MF-30) Porous Metal model specific attributes ( MF-40, MF-55, MF-80A, Low-pore
customizations) 
○ WEBTi / Porous Metal Titan ▶ WEBTI Titan is a porous metal titan made of Titan powder
and fiber-like Titan.
There are two different types of raw materials, each
with a unique properties (Opening, Thin, etc.) for various applications.
- Any WEBTi titan can be bonded to the titanic plate and to the
gourd. It can also respond to plating and processing. ○ Current collector for lithium ion
[Characteristics] Used as anode electrode current collector, a cathode electrode current collector for lithium ion, and an electric double layer capacitor. Provide instructions on hardness and purity, thickness and hole diameter accuracy and opening rates to produce a negative electrode current collector accordingly.
The foil itself also provides a continuous etching hole for light weight and the stability of the heat exchange of electrolyte. The Roll To Roll production system enables environmental and affordable production!
Positive current collector
Negative current collector 
※ This
product is manufactured for general industrial use and cannot be used for
medical and special purposes.
※ When
using the product, check the performance of the test according to its purpose
before use.
※ When
using, test the performance according to the purpose before using it.
Material |
Positive, Negative |
Hardness |
Hardness material |
Purity |
※ (1) |
Thickness |
20μ |
30μ |
Hole Precision |
※ (2) |
Hole open rate |
※ (3) |
Epidermis |
Gloss surface/Gloss surface | Gloss surface/Small surface |
○ TOYAL PASS - Positive current collector for Cell and Capacitor
[Characteristics]
* Al gourd with a fine hole
* Can Pre-doping of Li ion * Less resistance than other porous coils
[The external appearance]
[Product LINE UP]
Thickness
/ ㎛ |
Width / mm |
Length
/ m |
Penetration
degree / sec |
20,
30, 50 |
~700 |
~3000 |
5~1000 | * Penetration degree : Time when 100 ml of
air passes through the gourd [SEM
Picture]
○ Driling Metal Foil
[2 French foil] - Lithium
Ion Capacitor (LIC) Current Collector Foil • Negative electrode: Cu foil punching
• Positive electrode:
Al foil punching (Electrolyte
etching is also available)
1) In-vehicle use,
idle quiescent current status, and the adoption of an electric dual-layer
capacitor (EDLC) precedes
2) Instant protection against lightning
• Electrode surface treatment for
collection, corrosion treatment, zinc treatment
- Possibility
to adopt lithium-ion secondary cells
[Foil Etching
Process]
Material Width : Metal
foil(Cu, Al SUS) of Maximum 350mm width
|
