Email Inquiry  : egrjang@nate.com      

( Please fill in your contact number when inquiring as e-mail. )       

Telephone Inquiry  :     042-471-7490      

1. Proton exchange membrane, PTFE ion membrane

( Proton Exchange Membrane / proton exchange membrane / PTFE sulfonic acid ion exchange membrane / Fuel Cell Membrane / fuel cell membrane )

○ Model name : N115

○ Model name : N117

2. Ion membrane (NR212)

(Sulfonic acid fluoride ion membrane)

3. Fuel cell catalyst solution coating 1ml

(Solution Fuel Cell Catalyst)

4. JM Platinum Carbon Fuel Cell Catalyst

 * Minimum quantity : 2g

5. Portable Acidity Meter

6. Antistatic solution (N-103X)

(colcoat N-103X, colcoat PX 플라스틱 제품 정전기 방지 액체 /

 표면 대전 방지제 / 정전기 방지액 / 정전기 방지 코팅액 )

( 정전기 방지제 / 정전기 차단제 / 표면처리제 )

^{Siloxane series (Si-O-Si chain) containing hydroxyl group (Si-OH). It is hygroscopic and adsorbs moisture in the air, and the adsorbed water escapes the charged electrons.
Coating on the surface of the object forms a colorless transparent glass film, which provides stable antistatic effect for a long period of time and contributes to light transmittance and surface hardness.}

Product Characteristics

^{1. Colloidal liquid with low viscosity and colorless & transparent (no addition of aromatic hydrocarbons)}

^{2. Can be used immediately without diluting or concentrating}

^{3. Antistatic effect compared to surfactant system antistatic}

^{4. Improvement of surface modification, heat resistance, chemical resistance and surface hardness by glass film formation}

^{5. Excellent storage stability}

How to keep

- At room temperature of 20 ℃

- Quality remains for 3 months (when unopened)

- Viscosity can be increased according to the preservation condition and there is no problem in product performance

7. Porous Metal ( SUS316L ) 

( Foam Metal / Perforated Metal / Metal Mesh, Gas Diffuse Layer Separator, Current Collector, Adsorption of contaminated water, Filtered impurities adsorption, magamine-manu )

Specifications by porous metal model( SUS316L) 

Select the metal in the following table.

SUS316L/Ti, Ni, Cu, Ag   

①. For MF-8, MF-13 models with large porosity, the minimum thickness is 5mm ~ Max. 
②. Minimum deformation processing unit thickness is 0.3mm. 
③. Minimum deformation processing unit thickness is 0.5mm.

Porous Metal model specific attributes  

( MF-8, MF-13, MF-20, MF-30)

Porous Metal model specific attributes  

( MF-40, MF-55, MF-80A, Low-pore customizations)